As you may have noticed if you are a smartwatch owners Samsung outside of Galaxy Watch Ultrasome Watch Faces have remained exclusive to the latter model. With the arrival of the update to the One UI 8 Watch, there is good news: a limitation has been removed that blocked the manual installation of these quadrants on other models. So let’s see How to install Exclusive Watch Faces of Galaxy Watch Ultra on the other Galaxy Watch.

How to install the Galaxy Watch Ultra quadrants on the other Samsung smartwatch: now you can!

Contrary to what was estimated, Samsung has not launched a new generation of Galaxy Watch Ultra together with Galaxy Watch8 and Galaxy Watch8 Classic, however it has however left some Watch Faces exclusively on the top model (Simple Ultra and Ultra Analog). If you like and want to install them on your Galaxy Watch “Non Ultra” at all costs, know that you can now do it: here is the result on Galaxy Watch7 (Always-on display screen included), thanks to the shots shared on Reddit.

A little time ago it was already possible to carry out the Sideload of the Galaxy Watch Ultra dials on older models, such as Galaxy Watch6, but the One Ui Watch 6 had blocked everything, preventing its installation even on the “brother” Galaxy Watch7 (released together with the Ultra). Apparently, this limitation has been removed With the arrival of the One Ui Watch 8 on Watch Ultra, and these Watch Faces can also be installed on the old Galaxy watches. It is not clear whether it is a temporary question or not, but let’s see how to proceed with the installation.

Here is one step by step to install the dials by Samsung Galaxy Watch Ultra on other Galaxy Watch:

  1. Download APK Simple Ultra and Ultra Analog on your Android smartphone;
  2. Download and install this application of the Google Play Store on your smartphone: it is used to be able to connect the clock to the phone with ADB wireless;
  3. Turn off the bluetooth on the smartwatch;
  4. Connect the Galaxy Watch to the same Wi-Fi network as the smartphone;
  5. Activate the developer options on the clock: you have to go to “Settings> Organization information> Software information“And touch the item” seven timesSoftware version“; You should see a confirmation message;
  6. Enable the ADB debug and debugs via Wi-Fi on the Galaxy Watch: you must go to “Settings> Developer options“And activate”Adb debug“So, touch the item relating to the debug on Wi-Fi, activate it and touch the button for the association: here you can see the IP address, the door and the association code, which will serve in the next point;
  7. Open the Bugjaeger Mobile ADB – USB OTG app downloaded in point 2 and start the association process: you may have to enter the information mentioned in point 6;
  8. Once the smartwatch is connected to the smartphone, you can access the latter to the package tab inside the Bugjaeger app: here you have to select the APK files downloaded in point 1 to proceed with the installation of the new quadrants.

At this point, you should be able to apply the new Simple Ultra and Ultra analog quadrants. For the changes you must first pass by the clock itself, so as to provide the permissions necessary for access to complications data: then you can also change from smartphones.

Have you been able to complete the installation procedure without problems?